1. Preparation before cutting
First of all, it must be ensured that its performance is intact before use, and that all of Oberta’s accessories are not damaged in any way. Once the power switch is turned on, whether it is the saw blade and the protective cover, or its safety protection measures , These all need to be checked clearly, and only after ensuring that all of them are normal and can be used, then the equipment can be used normally.
2. The precautions during the cutting process are cutting
The preparations have been made before, so you must keep a clear head throughout the cutting process. Because the cutting machine is dangerous, you must pay attention to it when operating it, and the entire power line must ensure that it can work normally, and you must wear the corresponding work clothing when using the cutting machine. . For some ladies, if you must tie your hair well when operating the instrument, and avoid being twisted by your hair, at the same time, if you are processing a workpiece, you must ensure that the workpiece is firmly clamped. . When cutting, people must deviate from the middle position and wear protective glasses. If these protective measures are not taken, the machine cannot be operated, but once it is found that the machine has a sound that does not belong to him, it should be stopped and checked immediately.
3. A series of work after cutting
After the processing is completed, the power must be turned off first, and then if the cut sample needs to be processed, then after the sample is processed, the entire machine is maintained, because there are related regulations and requirements for the instrument. Do its cleaning work all day.