The production of motorcycle aluminum alloy wheels mainly includes casting, rough machining, heat treatment, finishing and coating, among which the two processes of casting molding and rough machining have the greatest labor intensity and the worst working environment. Using Wanfeng motorcycle aluminum alloy wheel automatic processing production line can improve the efficiency by more than 70%, greatly reduce the number of operators, improve the working environment, reduce the operation cost of the enterprise, and effectively enhance the market competitiveness of the wheel hub enterprise.
The processing of aluminum alloy motorcycle wheels mainly includes: cutting riser and gate, Wheel grinding, drilling center hole and drilling valve core hole. Due to the characteristics of gravity casting process, the shape of riser and gate is large, and the mass accounts for more than 1 / 3 of the blank mass of hub, which is very inconvenient in hub transportation and manual transportation. At present, domestic enterprises use a general riser cutting machine and a general center hole drilling machine to cut risers and gates, pre drill center holes and drill valve core holes. The scattered process requires a large number of employees, the huge noise generated in the process of cutting riser and the high labor intensity in the process of handling and drilling center hole, which not only has a serious impact on the health of employees, but also improves the operation cost of the company.
Therefore, in the process of hub processing, Wanfeng has developed an automatic production line that can cut risers and gates, wheel deburring, pre drill center holes and drill valve core holes, which can effectively solve the above problems.
